Setting up an autopilot
Create a newsletter autopilot with the five-step wizard, try a sample issue, and turn it on. Afterwards, fine-tune everything on the autopilot's own page.
Before You Start
An autopilot needs four things before it can write an issue:
- A verified sending address. Only addresses on a verified, not paused domain can be picked — see Custom Email Domains.
- A template with a Content area. Every issue is written into it — see Email Templates.
- Content to write from, ticked for this autopilot in step 4 of the wizard or later on the brand's Content sources page.
- Someone to pay for the AI writing: free credits during the free 14 days, credit you bought, or your paid plan's usage billing.
The Setup Wizard
Go to Marketing → Newsletter → Autopilot and click New autopilot. The Set up Newsletter Autopilot window walks you through five steps, named across the top: Start, Schedule, Campaign, Content and Review. You can click a step you have finished to go back to it.
Start
Pick the Brand the autopilot writes for (it can't be changed later; with only one brand it is chosen for you) and give it a Name — up to 80 characters, only for you: it shows in the autopilot list and on the campaigns it creates. Underneath, the wizard says how much the brand has to write from: "N pieces of content across M sources are available to write from". If it says Nothing to write from yet, use Open Content sources to add content first. Click Continue.
Schedule — "When should issues go out?"
| How often | When issues go out | Default |
|---|---|---|
| Weekly | On the weekdays you pick. All seven means daily. | Tuesday |
| Every 2 weeks | On the weekdays you pick, every second week, counted from the day you turn the autopilot on. | Tuesday |
| Monthly | On one Day of the month, 1–31. 31 means the last day of any month. | 1 |
| After the previous one | A set number of days (1–365) after the previous issue finished sending. | 7 days |
Then set the Send time (default 09:00), the Timezone (default: your browser's) and Written ahead of the send by — 1 hour, 6 hours, 1 day (default), 2 days or 3 days. With approval on, this is how long you have to read each issue.
Campaign — "The campaign each issue becomes"
These settings apply to every issue. Each issue is an ordinary campaign you can open, edit and cancel.
| Setting | What to know |
|---|---|
| Sender address | Required. Only addresses on a verified, not paused domain are listed. |
| Sender name | Filled in with the brand's name once you pick an address. Up to 120 characters. |
| Template | Required. Only templates with a Content area are listed. |
| Audience | All active contacts (default), Segments or Groups — one kind at a time, up to 50 segments or groups. The live count below reads "N contacts right now". |
| Send priority | Low, Normal (default) or High. When several campaigns wait on the same domain, the higher priority goes out first. |
| Spread over several days | Off by default. Switched on, it sends at most this many e-mails a day (500 to start with); the remaining readers get the issue on the following days. |
Send priority and Spread over several days sit under Advanced delivery options.
Content — "What may it write from?"
| Setting | What to know |
|---|---|
| Source tick boxes | Nothing is ticked by default. Until at least one source is ticked, you can't turn the autopilot on or generate a sample. |
| About the readers | Who receives the newsletter and what they care about. Up to 1,000 characters. |
| Standing instructions | Applied to every issue: tone, things to always or never mention, a closing line. Up to 4,000 characters. |
| Language | The brand's language (default) or one of 17 languages. |
| Length | Short (2–3 sections), Medium (4–5 sections), Long (6–8 sections) or Varied (default). Varied never picks the same length as the previous issue. |
| Generate images | On by default. Images per issue: 1–3 (default 1). Image model lists the available models with their cost per image. Image style (up to 500 characters) is added on top of the brand's image style. Image model is shown only when your plan lets you choose the AI model. |
| Text model | Under Advanced, and shown only when your plan lets you choose the AI model. The model that plans and writes the issue. Default uses your workspace's standard models. |
The wizard doesn't ask for Skip content older than. A new autopilot starts at 18 months: blog posts, feed entries and website pages older than that are never picked, while help articles, docs, FAQs and products are never limited. You can change it later under Settings on the autopilot's page.
Review
Check the summary: Schedule, Written, Audience with its contact count, Issues per month, Cost per issue, Content sources ticked and — only without a subscription — Sending each issue in credits. If a daily send limit would make one issue take longer to send than the gap between issues, a warning says the issues will overlap; it doesn't stop you.
Require my approval is on by default: every issue waits as a draft until someone approves it. Switch it off and each issue is scheduled as soon as it is written — you'll be asked to confirm when you turn the autopilot on.
Try a Sample First
Generate a sample on the Review step saves the autopilot turned off and writes one real draft campaign — about a minute, a bit longer with images. It is billed like any issue and is never sent.
When it's ready you see its subject and topic, and can choose Open the draft, Turn on Autopilot or Keep it off for now. The sample appears in the autopilot's issue history as Sample, its campaign name ends in "· sample", and in the Campaigns page's Drafts list (turn on Show samples to see it) it carries an Autopilot sample · never sent label.
A new sample replaces the previous one. As soon as the next sample is ready, the autopilot deletes its earlier samples that never went out: their drafts, their rows in the issue history, and the topic ideas only those samples used. A sample that was sent or scheduled stays. A sample you edited by hand is replaced too, so if you want to send it yourself, send or schedule it before you generate the next one.
Turning It On
On the Review step, Turn on Autopilot saves and starts it; Save, keep it off only saves it. Turn on Autopilot and Generate a sample stay unavailable until at least one content source is ticked.
When the first issue is written depends on the schedule:
- Weekly, Every 2 weeks, Monthly — ahead of the first send time, by your Written ahead of the send by setting. If that moment has already come, it's written right away.
- After the previous one — the first issue is written right away and goes out at the first send time that is at least one "written ahead" period later.
A notification goes out when the draft is ready for approval (or, with approval off, when the issue is scheduled).
The Autopilot's Page
Open an autopilot from the list to see its page. The title bar has:
- On / Off — a switch that asks for confirmation before it changes.
- The save controls — Unsaved changes, Discard and Save changes — which appear once you change something on the Settings view.
- A three-dot menu with Generate a sample and Content sources.
Two views sit under the title: Issues and Settings. Above both, two notices appear only when they apply:
- Waiting for your approval, when a draft is ready — with Open the draft, Approve & send and Regenerate.
- The last issue could not be written, when the last issue failed — with the reason and Write it again.
The Issues view
Four tiles come first: Status (on or off, and whether each issue waits for your approval), Next issue (when it is written and sent, "Writing an issue now…", or a note that nothing is written while the autopilot is off), Schedule, and Writes for — the brand, fixed at creation. Click it to open that brand's Content sources. Below the tiles, Issue history lists every issue the autopilot has planned, written or sent, newest first. It opens with totals (Issues sent, Emails sent, Open rate, Click rate), then one row per issue with Issue, Status, Date, Sent, Open rate and Click rate, and a "Why this topic: …" line under an issue when it has one. Issues and approval covers the rows and their buttons.
The Settings view
| Section | What you change there |
|---|---|
| General | Name and Check each issue before it goes out. |
| Schedule | How often; the days, the day of the month or the days between issues; Send time and time zone and Write it ahead by. |
| Content | Sources, About the readers, Instructions for every issue, Skip content older than, Language, Length and Text model. |
| Images | Add images, Images per issue, Image model and Image style. |
| Sending | Sender address, Sender name, Template, Audience, Priority, Limit how many go out per day and Emails per day. |
| Danger zone | Delete autopilot. |
Skip content older than offers 3 months, 6 months, 1 year, 18 months (the default), 2 years, 3 years or No limit. It applies to blog posts, feed entries and website pages, never to help articles, docs, FAQs or products.
Click Save after editing. Changes apply to issues written from now on — a draft that is already waiting keeps the settings it was written with.
Generate a sample — in the three-dot menu at the top and in the Issue history header — writes one real draft with the saved settings and adds it to the issue history within a minute or two; it is never sent, and once it is ready it replaces the autopilot's earlier samples, as described above. It is unavailable while an issue is being written, and warns you if you have unsaved changes.
Switching the autopilot on here also needs at least one ticked source. Switching it off asks for confirmation first — what it cancels is explained in Issues and approval.
The List Page
Marketing → Newsletter → Autopilot shows a table with one row per autopilot. Until you have created one, the page explains the feature (Newsletters that write themselves) and offers New autopilot. Its columns:
- Autopilot — the name (click it to open the autopilot) with the schedule in words under it, for example "Weekly · Tue · 09:00 Europe/Budapest".
- Brand — shown when you have more than one brand. Click it to open that brand's Content sources.
- Status — a badge, the most urgent one first: Needs approval, Failed, Writing, On or Off. Under it you read Approval required or Sends on its own, or, for a failed autopilot, the last error.
- Audience — for example "All active contacts" or "2 segments".
- Next issue — when it sends and when it is written ("Written …"), or "Writing the next issue…" or "After the current one finishes".
- Last issue — its date and what became of it.
Each row ends with a button — Review draft when an issue is waiting for your approval, otherwise Open — and a ⋯ menu with Content sources and Turn on / Turn off. Turning off asks first, turning on an autopilot that sends without approval asks first, and turning on needs at least one ticked source. Issues waiting for your approval also get their own box above the table, with a Review draft button for each.
Search by name, filter by Status and Brand (shown when you have more than one brand), and sort by Autopilot, Next issue or Last issue. New autopilot opens the wizard.